Delta Anti Slip Topcoat

Delta Anti Slip Topcoat is a rough coating layer integrated with fine particles and proprietary nano particles to improve the slip resistance of floor.


  • Excellent UV and weathering resistance
  • Meets HDB & BCA slip resistance specification
  • Suitable for both indoor and outdoor application
  • Available in clear and standard colour
  • HACCP certified for use in food processing areas
    Application Video

Ask us questions to find out more of Delta Anti Slip Topcoat.

Areas of Application

Mineral Surfaces

  • Ceramic tiles
  • Marble
  • Granite
  • Homogeneous tiles
  • Glazed tiles
  • Porcelain tiles
  • Quarry tiles
  • Mosaic floor
  • Limestone
  • Slate
  • Terrazzo
  • Concrete surfaces

Resinous Surfaces

  • Epoxy
  • MMA
  • Polyurethane
  • Polyurea coatings

Perfect for wet areas such as toilets, kitchen, balconies, walkways, staircase, pool decks, ramps, storage or warehouses etc..


Note: You may want to test Delta Anti Slip Topcoat on an inconspicuous small area to determine if the floor material is suitable for application. If found not suitable, please discontinue to use.

Direction for use

Mineral Surfaces Preparation

  • Using Delta Anti Slip Floor Treatment, transfer the solution onto the surface using sponge or mop.
  • Use bristle pad or brush to scrub the surface for 2-3 minutes.
  • Rinse off thoroughly with plenty of water and squeegee dry the floor.

Resinous Surfaces Preparation

  • If resinous coating is not sound, remove the coating, sanding and vacuum clean.
  • If resinous coating is sound, proceed with sanding and vacuum clean.

Application

  • Make sure the surface is clean and dry.
  • Shake Part A, pour Part B to Part A and shake to mix well.
  • Pour mixture to paint tray, using epoxy roller, apply a layer on the surface.
  • It takes at least 8 hours for touch dry and 24 hours for foot traffic. The curing time may vary depending on humidity level around the area.

Additional Note

  • Apply second or third layer for a rougher surface after touch dry.

Precaution

  • Content is highly flammable. Do not smoke when working. Ensure adequate ventilation and avoid inhaling vapours when working.
  • Do not consume. Use only as intended. Keep out of reach of children.
  • Use protective rubber gloves, rubber boots and eyes shield when using Delta Anti Slip Topcoat to avoid contact with skin and eyes.

    In case of contact with skin, remove contaminated clothes immediately and wash off affected areas with water.

    In case of contact with eyes, wash eyes thoroughly with water for at least 15 minutes and seek medical treatment if necessary.


Instructional Video

FAQs

1. What is Delta Anti Slip Topcoat?

Delta Anti Slip Topcoat is a rough coating layer integrated with fine particles and proprietary nano particles to improve the slip resistance of floor.

2. Where can I apply Delta Anti Slip Topcoat on?

Usually used on mineral surfaces such as ceramic tiles, marble, granite, homogeneous tiles, glazed tiles, porcelain tiles, quarry tiles, mosaic floor, limestone, slate, terrazzo and concrete surfaces, or resinous surfaces such as epoxy, MMA, polyurethane, polyurea coatings in wet areas such as toilets, kitchen, balconies, walkways, staircase, pool decks, ramps, storage or warehouses etc.

3. How do I apply Delta Anti Slip Topcoat?

Mineral Surfaces Preparation

  • Using Delta Anti Slip Floor Treatment, transfer the solution onto the surface using sponge or mop.
  • Use bristle pad or brush to scrub the surface for 2-3 minutes.
  • Rinse off thoroughly with plenty of water and squeegee dry the floor.

Resinous Surfaces Preparation

  • If resinous coating is not sound, remove the coating, sanding and vacuum clean.
  • If resinous coating is sound, proceed with sanding and vacuum clean.

Application

  • Make sure the surface is clean and dry.
  • Shake Part A, pour Part B to Part A and shake to mix well.
  • Pour mixture to paint tray, using epoxy roller, apply a layer on the surface.
  • It takes at least 8 hours for touch dry and 24 hours for foot traffic. The curing time may vary depending on humidity level around the area.

Please use the appropriate PPE like safety glasses, boots and hand gloves.


4. While using Delta Anti Slip Topcoat, is there any discomfort caused such as noise and vibration?

Aside from not being able to use the working area, minimal noise is observed and no vibration.

5. After using Delta Anti Slip Topcoat, will there be odour smell left behind?

Once Delta Anti Slip Topcoat is dry, there will be no odour left behind.

6. Is Delta Anti Slip Topcoat safe to use in food processing areas?

Yes, Delta Anti Slip Topcoat is HACCP certified which makes it safe to use in food processing areas.

7. How long does Delta Anti Slip Topcoat take to cure?

It takes at least 8 hours for touch dry and 24 hours for foot traffic. The curing time may vary depending on humidity level around the area.

8. How long does Delta Anti Slip Topcoat last?

Subject to the actual usage of the floor area, Delta Anti Slip Topcoat normally last for more than 1 year.

9. How do I know the improvement on the slip resistance of the surface after using Delta Anti Slip Topcoat?

You can feel the difference before and after and there are also test instruments that can be used to measure the anti slip reading of floor surfaces as shown in the video. This video shows the improvement on the slip resistance reading comparing the before and after use of Delta Anti Slip Topcoat.

10. Is Delta Anti Slip Topcoat available in Glossy or Matt finish?

No, not at the present. It is currently only available in Satin finish.

11. Is Delta Anti Slip Topcoat available in various colours?

Yes, it is available in clear and various colours. Click here to download the colour chart.

12. Is Delta Anti Slip Topcoat suitable for barefoot?

Not really, it feels rough for barefoot. We will recommend to use Delta Anti Slip Floor Treatment instead.

13. Is Delta Anti Slip Topcoat suitable for laminate or vinyl flooring?

No, it is not suitable.

14. Will Delta Anti Slip Topcoat be washed away by detergent or soap?

No, the coating will not be easily washed off by detergent and soap.

15. Can I use high pressure water jet to wash the floor after application of Delta Anti Slip Topcoat?

No, the high pressure water jet will damage the coating.

16. What is the difference between Delta Anti Slip Floor Treatment and Delta Anti Slip Topcoat?

Delta Anti Slip Floor Treatment is not a coating. It works by creating microscopic channels on the surface.
Delta Anti Slip Topcoat is a rough coating layer above the surface.

17. Is there a technical person that can advise more on Delta Anti Slip Topcoat?

Yes, you may call us at 6363 0300 or email us for more information.

18. Where can I buy Delta Anti Slip Topcoat?

You can buy it online at www.DeltaEmart.com or in store located at 29 Woodlands Industrial Park E2 Nordix Singapore 757461.